Australia
- Maximum length of 240m with mainstream large-size module
- Unique multi-point drive, approved by authoritative CPP test and certification
- The industry's first BLDC system with a more than 30 years’ maintenance-free serviced life
Equipped with multiple motors, Antai’s TAI-Space 1P Single-Axis Tracker can be extended to five strings making it ideal for utility scale PV plants.
• Maximum 240m in length with mainstream large-format module
• Unique drive through electric synchronously
• Unique Brushless Direct Current Motor
- Maximum length of 240m with mainstream large-size module
- Unique multi-point drive, approved by authoritative CPP test and certification
- The industry's first BLDC system with a more than 30 years’ maintenance-free serviced life
- Unique drive through electric synchronously, quick to installation and easy to maintenance
- Match for auto-cleaning robots
- Smart Commissioning allows for operated and tested via smart phone QR code scanning
Unique Brushless Direct Current Motor, life span is more than 30 years
|
Electrical Specification |
System Specification |
||
|
Control Algorithm |
Astronomical algorithm + tilt sensor close loop control |
Drive Mode |
Slew driver |
|
Control Component |
Antai control unit, one unit per tracker |
Foundation Type |
Concrete/Pile ramming steel |
|
Communication |
Zigbee wireless communication/RS 485 cable communication |
Tracking Range |
±60° |
|
Working Temperature |
-30℃~60℃(with lithum battery), -40℃~60℃(without lithum battery) |
Module Layout |
One-in-portrait (1P) |
|
Power Supply |
String power/inverter/220VAC |
Ground Clearance |
0.3m |
|
Back Tracking |
Yes |
Working Wind Tolerance |
≤18m/s |
|
Night Safe Stow |
Yes |
Max Wind Tolerance |
55m/s(ASCE7-10 ) |
Adjustable tilt flat roof mounting system
The adjustable tilt flat roof mounting system can be tilted angles from 10° to 60° to optimise energy output at all latitudes.
Non-Penetrating Rooftop Solar Racking
The non-penetrating rooftop solar mounting system is a headache-free solution for mounting solar panels on roofs where penetration is not possible. Ideal for standing seams and large spans.
Metal roof mounting system
The Metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. L Feet , hanger bolt is available as foot option.
Non penetrating ballast mounting rack
The Non penetrating ballast mounting rack is a ideal solution for use on industrial buildings with low admission additional loads. The system is delivered in compact form to save cost.
Steel carport solar mounting system
The Steel carport solar mounting system can achieve heating isolation and waterproof your car parking.
Tile roof solar mounting system
The Tile roof solar mounting system is suitable for roofing with pantiles and corrugated fibre cement, with wide range of different roof hook for the best choice.
Ramming pile ground mount
Designed and certificated according to Australian standards, this ground mounting solution is standardized to fit 18 solar panels with sizes up to 2300 x 1200mm. It also features flexible adjustments to allow achieving 20°, 25°, and 30° install angles, which helps users to optimise orientation and tilt to obtain maximum efficiency in energy collection from the sun.
Rail-Free ballasted flat mounting system
The Rail-Free ballasted flat mounting system is our newly developed product for your choice, a south-oriented racking solution for mounting framed modules on flat roofs with 5°，10°mounting tilts.
