Recently, Antaisolar announced that one 26MW utility scale solar plant in Cambodia is scheduled to be grid connected at the end of 2021. The solar farm is located in located in Bavet, a special economic zone on the border gate between Cambodia and Vietnam, about 150 kilometers from the capital, Phnom Penh. In consideration of economic and reliability, Antaisolar engineers work on to provide steel solar structure with concrete foundation. In order to guarantee the smooth process of the entire work, Antaisolar technical supporting team came on site to provide installation guidance for nearly three weeks, which largely make it easier and faster for whole installation. The client spoke highly of Antaisolar’s service to meet the special needs of grounding and bonding of solar plant and quick response throughout the entire installation. At present, the development of solar energy in Cambodia is in its infancy. In 2020, solar power generation only account for 3.4% of the total domestic power supply, there exists great untapped potential for solar power. The local area has suffered from power shortages. In an effort to meet the growing demand for electricity and improve the reliability of Cambodia’s power supply, Antaisolar will continue to provide efficient solar racking solution with localization service and contribute to the development of local solar energy.

Recently, the solar plant adopted Antaisolar's Ant-Cloud tracker in Thailand has completed the whole installation and finally made grid connection. With on-site technical support and in time service, the project went on smoothly and ready for power generation. Ant-Cloud, the 2P configuration solar tracker with multi-point drive for greater stability, has already applied for numerous solar farms across the world. Its reliable performance has been recognized by accredited technical testing provider and proven in actual project cases. Antaisolar’s both ANT and TAI series solar tracker has obtained the IEC 62817 certification TÜV NORD Group, which is a testament to the high reliability and high performance of solar trackers. The IEC62817 certification specifies the design requirements, test methods and judgment basis for the tracker's structural strength, tracking accuracy, reliability, durability and other parameters. It is currently the most comprehensive and authoritative evaluation standard for solar trackers. Antaisolar’s both ANT and TAI series trackers have gone through stringent tests and the result turned out that all the parameters are better than the international standard requirements. With the growing number of solar tracker plant going live, more projects utilized Antaisolar 1P or 2P solar trackers can be seen to empower the higher power generation and stable O&M of solar plants.

It’s said that the solar plant is located at the golf course, utilized Antaisolar aluminum ground mounting system with concrete foundation, and it had been completed the installation and grid connected. In the early stages of the project, it can be seen that gasoline tanks was adopted to shape the concrete, which help to construct a solid foundation. The aluminum mounting structure was delivered with pre-assembly in factory, which can be unfolded on site to make installation much more easier and thus largely saving labor costs. Based on 15 years commitment in solar mounting system, Antaisolar can offer tailor-made solar racking solution to meet any needs. More projects at :https://www.antaisolar.com/news/searchpcb

The solar tracker plant located in Thailand is under smooth installation and expected to be completed at the end of October, 2021. Antaisolar provided Ant-Surface tracker with three linear-actuator drive through electric synchronously. Project background -Location: Thailand -Wind Speed: 27m/s -Project field temperature: -10℃-+60℃ -Installed: Oct, 2021 -Size of system: 1.24MW Product details - Module orientation: 1P Portrait - Foundation type: Concrete -Minimum ground clearance :500mm - Module brand: Jinko solar 495W -Modules per string:14 -Rail material: Galvanized carbon steel - Post: Galvanized carbon steel - Warranty: 5 years drive and control, 15 years structure Special Features Of The Ant-Surface solar tracker • Adopted synchronous multi-point actuator offering greater stability • Fast installation by easy-installed actuator, only require one single person • Self-developed SCADA platform offer real time monitoring and O&M to ensure normal operation • Tracking algorithm: astronomical algorithm+ intelligent algorithm, optimizing tracking angle for each controller to avoid shadow and for low irradiation condition and scattering lights during cloud days. • Approved by CPP wind tunnel test for greater stability Check out more Antaisolar’s solar tracker solutions at here: https://www.antaisolar.com/project-news_nc4 and find video for this project at below.

The 4.738MW solar plant ,located in Alashankou, Xinjiang where has unique light resources, is under installation. Taking account of local climatic conditions such as extreme low temperature, high snow pressure and heavy sand, the system adopted carbon steel solar structure to achieve better balance between the overall stability and investment. The carbon steel PV mounting system,  which delivered an economical and reliable solutions for photovoltaic projects on a free surface. Strong steel solar structure allows for lager span between footings that can be cost-effective and robust. In order to ensure smooth process while installation, Antaisolar technical engineers came on site to push ahead with the project and to explore any new solutions for further optimization. The project site is located on the border between China and Kazakhstan with average of 10 hours of light per day, and it’s definitely a proper region for developing solar energy.

It’s reported that the renewable energy accounts for approximately 20% of its energy mix in Mexico. In 2017, the Mexican Ministry of Energy announced a new energy transition plan on its official website and established the goal of new energy development. It is estimated that new energy will account for 30% by 2021 and 60% by 2050. And it is expected to become the world's seventh largest solar market in 2021. The application of fixed structure solar plants and solar tracker plants are evolving in a rapid way. In this chapter, we are going to share the case study of ANT-cloud solar tracker （single-axis 2P solar tracker）applied for solar plant in Mexico. Project background -Location: Mexico -Wind Speed: 40m/s -Installed: May 2021 -Size of system: 498KW -Array layout: 2×42 Product details - Module orientation: Portrait - Ramming pile embedment (below ground ):1500mm -Tracking range: ±50° - Module brand: Trina solar 495W -Modules per string:14 - String voltage: 1000V -Rail material: Galvanized carbon steel - Post: Galvanized carbon steel - Warranty: 5 years drive and control, 15 years structure Special Features Of The Ant-cloud solar tracker • Adopted synchronous multi-point actuator offering greater stability • Easy-installed actuator, only require one single person • SCADA platform for real time monitoring and offer smart  weather protection mode • Tracking algorithm: astronomical algorithm+ intelligent algorithm • Completed CPP wind tunnel testing for greater stability For more about the utilising of  Ant-cloud solar tracker, please click here to see the 1MW Power Park in Thailand.

Recently, a 1MW solar tracker project located in Rayong, Thailand is under smooth installation, which adopted Antaisolar ANT-cloud solar tracker with precast concrete foundation. Due to the impact of Covid-19, the completion will extended to at the end of August, 2021. About ANT-cloud ANT-cloud the multi-actuator single-axis 2P solar tracker, is the best match with bifacial modules. Designed with patent linear-actuator drive through electric synchronously, this advanced system is free from transmission bar which allows for quick installation, convenient maintenance and low consumption, effectively reducing the labor cost. What are the tracker’s advantages for this projects? As for installation efficiency , Antaisolar Ant-cloud is equipped with easy-installed actuator  which only require one single person to install, the patent torque tube fastener also provide a unique way for 2 times faster installation. Antaisolar’s sales engineers came on site to give any support for the smooth installation. Moreover, with Astronomical Algorithms+Intelligent Algorithms, Antaisolar Ant-cloud solar tracker can iterate the optimized tracking angle for each controller with a 0.5%-3% power generation increased compared with traditional algorithm. Upon completion, intelligent O&M based on self-developed SCADA platform can offer system potential risks forewarning and weather condition warning to ensure the stability of power plant. Ant-cloud solar tracker has proven to be proper solution for large scale solar power plants in many other countries such Mexico, China, Armenia, etc. A few of projects utilized Antaisolar’s tracker in Thailand are under production and will add to local clean energy generation.

It’s reported that the solar  project was collaborated with one of the most biggest solar distributors in South Africa. Located in Port Elizabeth, South Africa and owned by ALGOA FM, Antaisolar provided solar racking solution for this project during the whole process. The aluminum solar carport mounting system adopted for  project offers a simplified and economic solution providing shade for parking and solar power generation. It is designed with single row of parking with concrete foundation. Highly pre-assembled supporting bracket can be unfolded on site make installation more easier and thus save labor costs. Based on the vast expertise in solar racking structure designing and strict quality control on production, the project turned out to be a pleasing one after first collaboration. Antaisolar and the local distributor partner have decided to conduct further cooperation on other projects in South Africa, next few projects are also in preparation for installation. Moreover, they will also start cooperation in other African countries, like Kenya and Nigeria. In order to better fit local market needs, Antaisolar is planning to customize related KITs for different project types, so as to keep as general stock and thus facilitating distribution in the African market.

Recently , China's National Energy Administration (NEA) had released the new policy that its provincial offices should nominate counties where a trial program to push blanket rooftop solar can be carried out, in order to move the dial on small scale PV in the nation. According to new NEA policy, The state entity wants selected counties to have at least 20% of all residential roofs equipped with solar energy, as well as at least 30% of commercial and industrial structures; 40% of non-governmental public buildings, such as hospitals and schools; and half of the roofs on the national estate. The new policy has unleashed a wave of distributed solar in the domestic market. On July 16th, the Shaanxi Distributed PV Seminar hosted by PV men and PV Box was held at the in Xi'an. Nearly 400 people from design institutes, investors, distributors, EPC, PV equipment suppliers, and financial institutions gathered together to discuss the dual-carbon goals and the huge opportunities for distributed photovoltaic development under the promotion of the entire county. Antaisolar participated in this event to share the case study of its 50MW HDB distributed solar plants in Singapore, which is an example for mandate solar on roofs in pilot countries under NEA new policy. The project was for the first three tenders, which covering 300+ HDB blocks with totally capacity of 50MW and all completed. Confronted with 300+ diversified rooftop, and strict design requirements such as reserved passageway, non-destruction for roof and certified by a third-party design agency, it requires significant expertise to conduct on site survey and design ability for solar racking suppliers. Antaisolar finally provided only five solar racking design templates for all 300+ different rooftop based on strong designing capability and rich experience for distributed solar plants. Upon completion, it’s equivalent to powering 12500 four-room flats with solar energy, and estimated to reduce carbon emissions by 30000 tonnes per year, said HDB. The roof construction environment of distributed solar plants are more complicated and usually need high requirements from government. Solar racking is the most complex and critical part of the entire implementation process. It plays an important role in reducing the difficulty of construction and providing key calculation data for investors, EPCs, and Design Institutes. Under the plan for achieving carbon-neutral across the world, Antaisolar will focus on its brand positioning- Leading supplier of the whole industry chain in PV mounting system, and strive to provide efficient and innovative solar racking solutions for global clients as part of the effort to develop greener and more sustainable towns, while reducing carbon footprint.